Nitro Gear & Axle Tacoma Non-Locker Gear Package 2016+

Tech Note:
Includes Rear Carrier bearings for Aftermarket LSD, Locker, etc. If running factory carrier, you will need 2x TOY90366-T0010

Must re-use factory rear carrier bearings.

Fits with 8" Rear.Fits factory OEM carrier or ARB RD111.

Nitro Gear Package for 16+ Toyota Tacoma is one of Nitro’s biggest sellers because these trucks need regeared. The Tacoma has a very tall overdrive in 5th AND 6th gear to turn low RPMS. The new 3.5l V6 makes plenty of horsepower, but needs to reach it's power band. Even with stock tires we have found the 6th gear is nearly useless, the gearing is so high that the transmission is constantly shifting. In a STOCK Tacoma Automatic 6th gear puts you at ~1500 RPM @ 60MPH. This simply does not work. You may not realize it, but you probably are hardly ever in 6th gear unless you are almost going downhill. By regearing you can bring the motor back to the RPM it needs to be. This will improve Economy, Performance, and shifting. This is one of the most important modifications you can make to your late model Tacoma whether on a stock truck, or especially when running oversized tire. This is the only way to properly compensate for inadequate factory gearing and the increase in tire diameter. We often hear people are worried they will turn high rpm’s if they regear. This is simply not the case. Remember, the Auto trans has a double overdrive.

RPM Figures are similar for Overseas Hilux Revo. And yes, even if you have a diesel, you will still benefit from the gearing. 4.88 is ideal for 33-35” on Turbo Diesel models. We have actually toured 1000’s of miles of the Australia in a Diesel Hilux with 35” and 4.88, and it performed flawlessly.
Automatic:
Stock-33” 4.88 Most Popular
33”+ 5.29 Most Popular
Manual:
32-34” 4.88 Most Popular
34”+ 5.29 Most Popular

Installation:
Labor charge for a regear is generally about 12 hours*. We also recommend Nitro Gear lube. We do offer professional installation in our Cashmere, WA Facility and generally need the truck for 1-2 days.

*Figures are for 4x4, 2wd only need 1 end done, so cost is much less.

**This product ships free.