You'll probably see more XD9000i winches on trail rigs than any other winch. No load line speed of 38-feet per minute and three-stage planetary gearing and the ability to run cool with low amp draw for long winching cycles are just a few reasons why.
| XD9000i SPECS/PART NUMBERS |
| Part Number:Â PN 27550 CE (12V DC) |
| Rated Line Pull:Â 9000 lbs. (4080 kgs.) single-line |
| Motor:Â 12V 4.6 hp, 24V 2.5 hp, Series WoundTM |
| Remote Control:Â Remote switch, 12' (3.7m) lead |
| Geartrain:Â 3-Stage Planetary |
| Gear Ratio:Â 156:1 |
| Lubrication:Â Aeroshell #17 |
| Clutch (freespooling):Â Sliding Ring Gear |
| Brake:Â Automatic Direct Drive Cone |
| Drum Diameter/Length:Â 2.5"/9.0" (6.4cm/23cm) |
| Weight:Â 85 lbs. (38.5 kgs.) |
| Wire Rope:Â 125', 5/16" diameter (38m, 8mm diameter) |
| Fairlead:Â Roller |
| Recommended Battery:Â 650 CCA minimum for winching |
| Battery Leads:Â 2 gauge, 72" (1.83m) |
| Finish:Â Argent Powder Coat |
| Nuts/Bolts:Â PN 39570 |
| CE Winches:Â CE products are designed to meet European Standards. CE winches include CE labels, Manuals, Safety Hook and Thimble. |
| 12V DC PERFORMANCE SPECS |
Line Pull
Lbs.(Kgs.) | Line Speed
FT./min(M/min.) | Motor
Current | Pull by layer
layer/Lbs(Kgs.) |
| 0 | 38(11.6) | 70 amps | 1/9000(4082) |
| 2000(910) | 14.4(4.39) | 180 amps | 2/8190(3715) |
| 4000(1810) | 11(3.35) | 255 amps | 3/7500(3402) |
| 6000(2720) | 8.67(2.64) | 330 amps | 4/7010(3180) |
| 8000(3630) | 6.88(2.10) | 415 amps | 5/6570(2980) |
| 9000(4080) | 6.38(1.94) | 460 amps | |
| Above performance specs are based on first layer of drum |
 |
Winch Dimensions:Â 21.8" L. x 6.3" D. x 9.94" H.
(553mm L. x 160mm D. x 252mm H.) |
| Mounting Bolt Pattern:Â 10.0" x 4.5" (254mm x 114.3mm) |
WARNING: This product may contain chemicals known